Description
The high-quality PRO CHARGE ULTRA 12 V / 40 A charger is packed with innovative features that allows up to three batteries to be optimally charged for long battey life.
Worldwide area of application
You can either supply the device with a voltage ranging from 80 – 270 V AC and 40 – 70 Hz or with a DC voltage of 130 – 320 V DC. The PRO CHARGE ULTRA can be used worldwide and easily powered by generators.
Suitable for a wide range of battery types
The Pro Charge Ultra chargers have 11 pre-programmed charging characteristics for the following battery types: Gel, AGM, maintenance-free or open lead acid batteries, calcium or even LiFePo4 batteries.
If your battery is not one of the pre-programmed types, you can easily set and save parameters for the final charge or trickle charge voltage via the device’s control panel.
Automatic desulphation / equalization
A further innovative feature is the automatic desulphation / equalisation. Every 7 – 10 days, a desulphation / equalisation and anti-stratification program is performed. During this process, the batteries are recharged and, in the case of batteries with liquid acid, any possible acid stratification is reduced or prevented. This cycle extends the longevity of your battery.
Integrated safety system
Function and charge are continuously monitored by a processor. In the event of a malfunction or faulty charging, the device switches off automatically and the panel informs of the corresponding fault. In the event of a processor error, a further safety system shuts down the unit.
Performance control and status monitoring
The digital panel on the front of the charger allows you to quickly and easily check that the battery is charging correctly and without errors.
You can also check the performance of the charger. The LED bar indicates whether the device is operating at maximum power or at which percentage power. A further 32 integrated LEDs provide information on charging and device status and on the battery type set.
Features at a glance
- Compact design and very low weight
- Wide AC and DC voltage input for worldwide use or generator operation
- State-of-the-art synchronized rectification with MOSFET technology
- Lower heat generation and efficient utilization of power
- Overall efficiency: > 90%.
- Processor controlled charging and monitoring
- 11 pre-programmed IUOUO characteristics for different battery types
- 3 separate PLUS charging outputs with common NEGATIVE.
(If a POSITIVE output is unused, it should be connected directly to a used POSITIVE output.) - 1x battery temperature sensor included
- Variable fan speed ensures the lowest possible noise level
- Programmable power reduction: 100%, 75%, 50% or 25%.
- Material: plastic and corrosion-resistant metal
- Protected against splash water (IP22)
- Cable length: 3 m
- Cable lug inner Ø: approx. 1.1 cm
Technical data
| PCU1240 | |
| Nominal voltage | 12 V |
| Charging current max. | 40 A |
| Input voltage | 80 – 270 V AC, 130 -320 V DC |
| Power consumption max. | 680 W |
| Dimensions | 260 x 215 x 90 |
| Weight: | 2.0 kg |
| Charging ports | 3 |
Features
Discover the features that make this product stand out. From technical details to specialfunctions – we’ve summarized all the key information for you.
Reviews
There are no reviews yet.