R&D Engine Compression Mount 300 lbs/136kg

Description

FLEXIBLE ENGINE MOUNTINGS

rr

• Capacity 30 – 2000 lbs per mount

rr

• Good vibration isolation

rr

• Fail safe design

rr

• Will withstand roll over test

rr

• Competitively priced

rr

• Wide range of sizes

rr

• Accepts propeller thrust

rr

• Pre-loaded

rr

• Slotted holes to assist alignment

rr

• Height adjusting to simplify alignment

rr

INSTALLATION DETAILS

rr

Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm.

rr

If more height is required use a spacer under the mounting casting. This applies to all mountings in the R & D Marine Range.

rr

HOW TO SELECT

rr

1. Engine type, number of cylinders

rr

2. Type of gearbox and reduction ratio

rr

3. Weight of engine and gearbox combined by weighing or manufacturers literature

rr

4. Is flywheel in conventional place between the engine and gearbox?

rr

5. Position of engine mounting points

rr

6. Find centre of gravity by balancing on a roller, if possible, (see above diagram)

rr

7. If centre of gravity cannot be found, assume weight distribution of 60% on rear mounts, with 40% on front mounts (if rear mount is in line with the flywheel)

rr

COMPRESSION MOUNTING

rr

Competitive, low height medium capacity mount giving good engine control. 5/8 Stud.

rr

Deflection: 1.65mm (0.065″)

rr

Height adjusting nut thickness: 14mm (0.55″)